smart Immersion Hydrostatic Liquid Level Transducer

Name:smart Immersion Hydrostatic Liquid Level Transducer

Model: WLI00

The smart Immersion Hydrostatic Liquid Level Transducer is used to measure the liquid level applications. It is based on the measured hydrostatic proportional to the height of the liquid with the principle, using ceramic piezoresistive effect sensing element and temperature compensation and linearity correction, then covert the hydrostatic pressure to an electrical signal output of 4-20mA DC .

The sensor part can drop into the liquid and the transmitter can be fixed by flange mounted or Bracket, easily to install and use.

Features:

Ø    Stability , high precision;

Ø    Directly drop into the measured medium, very easy to install and use;

Ø    Solid-state structure, no moving parts, high reliability , long life from the water, the viscosity of the oil to a paste can be highly accurate measurements, not measured media bubble, deposition, electrical characteristics;

Ø    Wide range of temperature compensation;

Ø    Standard 4-20mA DC output for RTU, PLC and acquisition equipments;

Ø    Wide range for measurements from 0.3~100m.

Ø    With power reverse polarity protection and overload current limit protection .

Specification:

Ø  Measurement range: 0.3～100m;(Default 5m, According to customer requirement.)

Ø  Measurement Liquid: the material not caused corrosion with 316L stainless steel material(Water, Oil, Diesel)

Ø  Precision: 0.2Class, 0.5Class, Deflaut:0.2Class;

Ø  Display: Default is no display, optional: 0~100% indicated linearity, LCD display meters, LCD display 0~100% indicated linearity, LED display 0~100% indicated linearity.

Ø  Working Temperature: -20～80℃;

Ø  Output: 2-wire 4～20mA DC ;

Ø  Working Power: Standard is 24VDC (12~36VDC is optional)

Ø  non-sensitive region:≤±1.0%FS

Ø  Cable material: Polytetrafluoroethylene(PTFE, F4)

Ø  Explosion-proof Rate: Exia ⅡCT6

Ø  Load Capacity:0-600Ω;

Ø  IP Rate:IP68

Installation Diagram: