Call today: +86-755-88848886

smart home specialist of  Made in China ,most of your favourite Modern auto-control digital family,Smart Mobile apk soft Faraway remote Control air conditioner,light, curtain etc.A Professional GSM Alarm System designer and manufacturer!GSM SMS Controller System &GSM House Alarm System&GSM Telemetry Units & GSM GPRS Logging System


Smart home Multi-function LCD GSM Alarm System

Smart home Multi-function LCD GSM Alarm System


Built-in GSM antenna, support quad band GSM 900/1800/850/1900MHz, suitable for global users.
This is an absolutely GSM wireless home alarm system which based on GSM 900/1800/850/1900MHz wireless network and it has internal auto dialer, will call up to 3 preprogrammed alarm phone numbers.
Alarm panel with LCD display & keypad, easy to operate. Don't need professional person to operate and install. The LCD display screen will display the alarm zone number or alarm types, etc. From the keypad and LCD display, you may also check what alarm numbers has been programmed (with password protection)
SMS alert features : If any wireless sensors are triggered, the GSM alarm control panel wil send SMS to preprogrammed cell phone numbers for alerting, eg. Wireless door magnetic sensor, wireless PIR motion detector, etc.
(New) Automatically detect window/door closed properly or not, if the window/door (that have installed wired door sensor) did not closing well, the alarm panel will self-detect this issue and make “di di” beep sounds to let the householder pay attention to it.
Tow way communication. Just like a phone that support listen in and talking to the people that in the house.
Timing arm/disarm function. Can set fixed time to arm or disarm, even you forget to arm the system in a hurry leaving your house at 9 a .m in the morning, the alarm system will automatically arm at 9 a .m for avoiding intruder break in.
The zone 01 to 26 can be set as partial arm zone . Y ou could set part of the zones as partial arm zone. Such as if you want to set zone 4, 5, 6 as partial arm zone, then you only need to set it according to the commands.
The name of zone 01 to 26 can be modified via SMS command.
For example, you want to change the original “Zone 5” into “Financial room PIR Alarm”
SMS command for remotely control, no distance limit
For example, if you are at abroad or out of home, and you want to remote control the alarm panel to be in arm/disarm status, or check the working status for the alarm panel, or you want to know about the backup battery status of the alarm panel. At this moment, you may check all of these information through sending SMS command to realize them, it's very easy & convenient to do it.
Two ways communication
Connect an external speaker for realizing two ways communication, using as a mobile phone to call any number and have two way talking.
Record voice function, you can pre-record a voice to the alarm panel and it will be automatically playback when the alarm panel calls you. The pre-record voice can be like something “Office's kitchen smoke sensor”, “parent's living room PIR sensor” etc, you can make it as you like, but within 10 seconds.
Exit time delay 30seconds; so that you have enough time to walk out the house and close your door without trigger any sensors.
Support unlimited wireless remote controllers , wireless sensors, and 2 or 3 wireless flashing sirens.
With 2 wired zones for connecting wired sensors , which keep high safety and no transmitting distance. Such as, wired fence detectors, wired beams detectors for enclosure, wired PIR motion sensor which far from alarm panel.
SOS emergency help: in the event of emergency , you can press panic button on the remote controllers or the separate panic button to trigger the system immediately for calling help no mater the system in armed status or disarmed status.
AC/DC power auto switch function , the control panel will automatically switch to backup battery, in case of the AC power outage. As well as the backup battery will automatically recharge with AC power in normal.
Compatible with Central monitoring software PH-BC110 and alarm receiver PH-008.
SMS alert & auto-dial alert when AC Power outage, AC power recovered
Notes: without SIM card and phone numbers, the device will work as an independent local alarm system.
GSM frequency: 900/1800 Mhz or 850/1900mhz for optional
Wireless frequency: 315MHz/433MHz for optional
Alarm response time: ≤8s (GSM signal in normal)
Working consumption : < 0.6W
Backup battery: DC7.4V/850MA, lithium battery
Backup battery working hours: ≥10 hours
Working condition: temperature: -20 ℃ ~ + 60 ℃ , humidity: ≤95% (non-condensation)
Record time: 10s
1 x GSM control panel
2 x Wireless Remote controllers
1x Wireless PIR motion detectors
1x Wireless door/window magnetic sensor
1 x Mini siren with 110DB sounds
1 x Power adapter
1 x English user manual
1 x Brand new & neutral package box